Disconnect the blade assembly
fromthewiperarmbypushingin
the lock tab. Hold the lock tab in
while you push the blade assembly
toward the base of the arm.
If you are changing the rear wiper
blade, go to step 6.
Front:
Raise the wiper arm off the
windshield.
Remove the blade from its holder
by grasping the tabbed end of the
blade. Pull firmly until the tabs
come out of the holder.
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Rear:
Raise the wiper arm off the hatch
glass and hold it.
Check the condition of the wiper
blades at least every 6 months.
Replace them if you find signs of
cracking in the rubber, areas that are
getting hard, or if they leave streaks
and unwiped areas when used.
1.
3.
2. 4.
Wiper Blades
186
LOCK TAB
BLADE
HOLDER
Do not open the hood when the wiper
arms are raised, or you will damage
the hood and the arms.
０５／０９／１３ ２０：０５：００ ３１ＳＣＶ６３０ ０１９１
To Next Page
Loading...
Need help?
General
