The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
Thesystemshouldbeleftinfresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.
Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.
This button turns the rear window
defogger off and on (see page ).
Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
vents in all modes.
Turning this dial clockwise increases
the temperature of the airflow.
Turn this dial clockwise to increase
the fan speed and airflow.
This button turns the air
conditioning on and off. The
indicatorinthebuttonisonwhen
the A/C is on.
When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).
The system automatically
turns on the A/C and
switches to recirculation mode. Air
flows from the center and side vents
in the dashboard.
Air flows from the center
and corner vents in the dashboard.
Airflow is divided between
the vents in the dashboard and the
floor vents.
Air flows from the floor
vents. When you select , the
system automatically switches to
fresh air mode.
Airflow is divided between
the floor vents and the defroster
vents at the base of the windshield.
63
CONTINUED
Rear Window Defogger Button
Mode Control Dial
Air Conditioning (A/C) Button
Temperature Control Dial
Fan Control Dial
Air Flow Controls
Recirculation Button
Vents, Heating, and A/C
Features
91
０５／０９／１３ １９：５２：２４ ３１ＳＣＶ６３０ ００９６
To Next Page
Loading...
Need help?
General
