82
Important Safety Precautions
Maintenance Safety
Servicing Your Honda
Carbon monoxide poisoning from
engine exhaust.
Burns from hot scooter parts.
Injury from moving parts.
Read the instructions before you begin,
and make sure you have the tools and
skills required.
Make sure the engine is off before you
begin any maintenance or repairs. This
will help eliminate several potential
hazards:
Be sure there is
adequate ventilation whenever you
operate the engine.
Let the
engine and exhaust system cool before
touching.
Do not run
the engine unless instructed to do so.
To help prevent the scooter from falling
over, park it on a firm, level surface,
using the side stand, center stand or a
maintenance stand to provide support.
To reduce the possibility of a fire or
explosion, be careful when working
around gasoline. Use only
non-flammable solvent, not gasoline, to
clean parts. Keep cigarettes, sparks, and
flames away from all fuel-related parts.
Be sure the rear brake lock is set before
running the engine while the scooter is
supported by the center stand. This will
prevent the rear wheel from spinning
and avoid the possibility of someone
being injured from contacting the wheel.
０８／０７／１４ １７：２７：２１ ３１ＭＧＦ６００ ００９１
To Next Page
Loading...
Need help?
General