EasyManuals Logo

Honda 2012 Odyssey User Manual

Honda 2012 Odyssey
441 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #356 background imageLoading...
Page #356 background image
355
Continued
Maintenance
Replacing Light Bulbs
Headlight Bulbs
When replacing, use the following bulbs.
1. Remove the clips using a flat-tip
screwdriver, then remove the upper part of
the air intake duct.
High beam headlight: 60 W (HB3)
Low beam headlight: 55 W (H11 for halogen bulb type)
Low beam headlight: 35 W (D2S for high voltage discharge type)
High Beam Headlight
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the cargo area or tow a trailer, have
the aiming readjusted at a dealer or by a qualified
technician.
The HB3 and H11 types are halogen bulbs.
When replacing a bulb, handle it by its base, and
protect the glass from contact with your skin or hard
objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
The exterior lights' inside lenses (headlights, brake
lights, etc.) may fog temporarily after a vehicle wash
or while driving in the rain. This does not impact the
exterior light function.
However, if you see a large amount of water or ice
accumulated inside the lenses, have your vehicle
inspected by a dealer.
Clip
Driver’s side
12 US ODYSSEY Revision-31TK86102.book 355 ージ 2015年10月8日 木曜日 午前11時47分

Table of Contents

Other manuals for Honda 2012 Odyssey

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda 2012 Odyssey and is the answer not in the manual?

Honda 2012 Odyssey Specifications

General IconGeneral
BrandHonda
Model2012 Odyssey
CategoryAutomobile
LanguageEnglish

Related product manuals