Honda BF75D - Engine Oil Replacement

127
MAINTENANCE
(2) These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the Honda
Shop Manual for service procedures.
(3) For professional commercial use, log hours of operation to determine proper maintenance intervals.
(4) When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
(5) Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
(7) The user who performs shift operation frequently will recommend you exchange of a shift cable around three years.
(8) Check the fuel line for leaks, cracks, or damage. If it is leaking, cracked, or damaged, take it to your servicing dealer for replacement before
using your outboard.
(9) Replace the fuel line if there are signs of leaks, cracks, or damage.
ITEM
Each use After use
First
month
or
20 hrs.
Every
6 months
or
100 hrs.
Every
year
or
200 hrs.
Every
2 years
or
400 hrs.
Refer to
page
Fuel filter
(Low pressure side)
Check o 141, 142
Replace o 142, 143
Fuel filter
(High pressure side)
Check o (2) —
Replace o (2) —
Fuel tank and tank filter Clean o 143, 144
Fuel line Check o (8) 69
Replace Every 2 years (if necessary) (2) (9) —
Thermostat Check o (2) —
Battery and cable connection Check level-tightness o 67, 134
Bolts and Nuts Check-tightness o (2) o (2) —
Breather tube Check o (2) —
Cooling water passages Clean o (4) o (4) —
Coolant leak Check o 148
Water pump Check o (2) —
Emergency stop switch Check o —
Engine oil leak Check o —
Each operation part Check o —
Engine condition (5) Check o —
Power Trim/Tilt Check o (2) —
Shift Cable Check-adjust o (2) (7) —
REGULAR SERVICE PERIOD (3) 
Perform at every indicated month or operating
hour interval, whichever comes first.
<;DQQMࡍ࡯ࠫ㧞㧜㧝㧟ᐕ㧝㧜᦬㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ