98
OPERATION
1. Press the DN (down) of the power
trim/tilt switch and trim the
outboard motor at the lowermost
position.
R3 type:
When the two outboard motors are
mounted:
1)Press the DN (down) of the power
trim/tilt switch on the control lever
and trim the outboard motors at the
lowermost position.
2)With the outboard motors trimmed
at the lowermost position, adjust
the trim angle of the right and left
outboard motors using the switch
on the control lever simultaneously.
Cruising (R type)
(R1 type)
POWER TRIM/
TILT SWITCH
POWER TRIM/
TILT SWITCH
(R2 type)
LOWERMOST
POSITION
(R3 type)
(single type)
(dual type)
POWER TRIM/
TILT SWITCH
POWER TRIM/TILT SWITCH
(LEFT) (RIGHT)
<;DQQMࡍࠫ㧞㧜㧝㧟ᐕ㧝㧜㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ
To Next Page
Loading...
Need help?
General
