122
TRANSPORTING
3. Secure the outboard motor on an
outboard motor stand with the
mounting bolts and nuts.
4. Remove the hoist hook and
reinstall the engine cover.
Trailering
(H type)
When trailering or transporting the
boat with the outboard motor attached
always disconnect the fuel line from
the portable fuel tank and tighten the
steering friction adjusting knob
securely (see page 66).
(R type)
When trailering or transporting the
boat with the outboard motor
attached, it is recommended that the
outboard motor remain in normal
running position.
Do not trailer or transport the boat
with the outboard motor in the
tilted position. The boat or
outboard motor could be severely
damaged if the outboard motor
drops.
The outboard motor should be
trailered in the normal running
position. If there is insufficient road
clearance in this position, then trailer
the outboard motor in the tilted
position using an outboard motor
support device such as a transom
saver bar, or remove the outboard
motor from the boat.
STEERING FRICTION
ADJUSTING KNOB
<;DQQMࡍࠫ㧞㧜㧝㧟ᐕ㧝㧜㧝㧤ᣣޓ㊄ᦐᣣޓඦᓟ㧞ᤨ㧟㧟ಽ
To Next Page
Need help?
General
