The following are the default values
for each customizable setting.
T he speed alarm function is of f.
The warning message function is
off. Only symbols are displayed in
the multi-information display.
Outside temperature display
adjustment value is 0°C.
Average fuel mileage for trip
meter A is not reset on refueling.
If the DEFAULT ALL operation is
not successful, you will see the above
display for a few seconds, then the
display goes back to the setting
display.
Measurements in the trip
computer correspond with the
measurements selected with the
mph to km/h change button
(km/h or mph).
The elapsed time is reset with the
ignition switch in the LOCK (0)
position.
Rev indicator is on.
ECO indicator is on.
Displayed language is English.
In the automatic driving mode, the
REV indicator goes out.
This setting is only on the right-
hand drive type.
Selecting the default setting is
cancelled.
On vehicles with i-SHIFT
Multi-Information Display
Instruments and Controls
132
06/08/07 17:58:46 32SMG610_135
To Next Page
Loading...
Need help?
General
