The coolant level should be up to
the MAX line. Add coolant if it is
low.
Pourthecoolantslowlyand
carefully so you do not spill any.
Clean up any spills immediately; it
could damage components in the
engine compartment.
Put the expansion tank cap back
on, and tighten it fully.
Do not add any rust inhibitors or
other additives to your vehicle’s
cooling system. They may not be
compatible with the coolant or
engine components.
Remove the expansion tank cap by
pushing down and turning
anticlockwise.
Make sure the engine and radiator
are cool.
Loosen the expansion tank cap by
turning it 1/8 turn anticlockwise.
This will relieve any remaining
pressure in the cooling system.
2.
3.
4.
5.
1.
Maintenance
Engine Coolant (Diesel models)
375
MAX LINE
CAP
06/08/05 22:33:20 32SMG610_378
To Next Page
Loading...
Need help?
General
