Place the child restraint system on
the vehicle seat, then attach the
child restraint system to the lower
anchorages according to the child
restraint system maker’s
instructions.
Some child restraint systems
designed for use with lower
anchorages have a rigid-type
connector as shown above.
When using the guide-cups,
always follow the child restraint
system manufacturer’s
instructions.
Attach the guide-cups to the
lower anchorages as shown in
the illustration.
You may use optional guide-cups
that came with your child restraint
system to install it to the lower
anchorages without damaging t he
seat surface.
4.3.
On some child restraint systems
Installing a Child Restraint System
Driver and Passenger Safety
50
Rigid type
GUIDE-CUPGUIDE-CUP
LOWER ANCHORAGE
06/08/05 21:50:23 32SMG610_053