Honda CRF250L 2019 User Manual

Instruments, Controls, &
Other Features
Ignition Switch
Leaving the ignition switch in the
(On) position
with the engine stopped will drain the battery.
Do not turn the key while riding.
Engine Stop Switch
Do not use the engine stop switch except in an
emergency. Doing so when riding will cause the
engine to suddenly turn off, making riding
unsafe.
If you stop the engine using the engine stop
switch, turn the ignition switch to the
(Off)
position. Failing to do so will drain the battery.
Odometer
The display locks at 999,999 when the read-out
exceeds 999,999.
Tripmeter
The tripmeter A and B return to 0.0 when each
read-out exceeds 9,999.9.
Document Bag
The owner's manual, registration, and insurance
information can be stored in the plastic
document bag located under the seat.
Ignition Cut-off System
A banking (lean angle) sensor automatically
stops the engine and fuel pump if the
motorcycle falls over. To reset the sensor, you
must turn the ignition switch to the
(Off)
position and back to the (On) position before
the engine can be restarted.
20161122161659_32KZZE200_eng_BOOK Page 99 Tuesday, November 22 2016 16:19:28 JST
Instruments, Controls, & Other Features
Information
96

Honda CRF250L 2019 Specifications

General

Displacement	249.6cc
Bore x Stroke	76.0mm x 55.0mm
Compression Ratio	10.7:1
Transmission	6-speed
Final Drive	Chain
Front Suspension	43mm inverted fork
Rear Suspension	Pro-Link single shock
Front Brake	Single 256mm disc
Rear Brake	Single 220mm disc
Front Tire	3.00-21
Rear Tire	120/80-18
Wheelbase	56.9 inches
Fuel Capacity	2.1 gallons
Starter	Electric
Fuel System	PGM-FI
Trail	113mm
Engine Type	Liquid-cooled, single-cylinder, four-stroke