Honda CRF250L 2019 User Manual

Drive Chain
Inspecting the Drive Chain
Slack
Check the drive chain slack at several points
along the chain. If the slack is not constant at
all points, some links may be kinked and
binding.
Have the chain inspected by your dealer.
1. Shift the transmission to Neutral. Stop the
engine.
2. Place your motorcycle on its side stand on
a firm, level surface.
3. Check the slack in the lower half of the
drive chain midway between the
sprockets.
Drive chain slack:
25 - 35 mm (1.0 - 1.4 in)
u Do not ride your motorcycle if the
slack exceeds 60 mm (2.4 in).
4. Roll the motorcycle forward and check
that the chain moves smoothly.
5. Inspect the sprockets. 2 P. 45
6. Clean and lubricate the drive chain.
2 P. 46
20161122161659_32KZZE200_eng_BOOK Page 68 Tuesday, November 22 2016 16:19:28 JST
Maintenance
65

Honda CRF250L 2019 Specifications

General

Displacement	249.6cc
Bore x Stroke	76.0mm x 55.0mm
Compression Ratio	10.7:1
Transmission	6-speed
Final Drive	Chain
Front Suspension	43mm inverted fork
Rear Suspension	Pro-Link single shock
Front Brake	Single 256mm disc
Rear Brake	Single 220mm disc
Front Tire	3.00-21
Rear Tire	120/80-18
Wheelbase	56.9 inches
Fuel Capacity	2.1 gallons
Starter	Electric
Fuel System	PGM-FI
Trail	113mm
Engine Type	Liquid-cooled, single-cylinder, four-stroke