EasyManuals Logo

Honda CRF250X User Manual

Honda CRF250X
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Servicing Your Honda 39
Subframe Upright Position
4. Tighten the screw (5) on the air cleaner
connecting tube clamp (6).
7. Install the seat (8) (page 35).
8. Install the left side cover (9), seat mounting
bolt (10), collar (11) and left side cover bolt
(12). Close the air cleaner housing cover (13)
and turn the quick fastener (14) clockwise.
(8) seat (12) left side cover bolt
(9) left side cover (13)
air cleaner housing cover
(10) seat mounting bolt (14) quick fastener
(11) collar
9.
Install the right side cover (15), seat mounting bolt
(16), collar (17) and right side cover bolt (18).
(7) wire band
6. Install the muffler (page 63).
(1) subframe mounting upper bolt
(2) subframe
(3) subframe mounting lower bolts
(4) hoses
Installation
1. Loosen the subframe mounting upper bolt (1).
2. Loosely attach the lower ends of the subframe
(2) to the mainframe while connecting the air
cleaner connecting tube to the carburetor.
Then align the subframe with the rear wheel
and tighten the subframe mounting lower
bolts (3) and subframe mounting upper bolt to
the specified torque:
upper bolt:
30 N·m (3.1 kgf·m, 22 lbf·ft)
lower bolts: 49 N·m (5.0 kgf·m, 36 lbf·ft)
3. Check the hoses (4) for slack.
(1)
(3)
(2)
(4)
(6)
(5)
(5) screw
(6) air cleaner connecting tube clamp
5. Install the wire band (7).
(7)
(8)
(13)
(14)
(12)
(11)
(10)
(9)
(16)
(18)
(17)
(15)
(15) right side cover
(16) seat mounting bolt
(17) collar
(18) right side cover bolt
10.Tighten the seat mounting bolts to the
specified torque:
26 N·m (2.7 kgf·m, 19 lbf·ft)
250X_030-059.qxd 08.7.3 10:10 ページ39

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda CRF250X and is the answer not in the manual?

Honda CRF250X Specifications

General IconGeneral
Engine Type249cc liquid-cooled single-cylinder four-stroke
Bore and Stroke78.0mm x 52.2mm
Compression Ratio12.9:1
InductionKeihin 37mm flat-slide carburetor
IgnitionCDI
TransmissionWide-ratio five-speed
Front Suspension47mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability; 12.4 inches travel
Front BrakeSingle 240mm disc with twin-piston caliper
Rear BrakeSingle 240mm disc
Front Tire80/100-21
Rear Tire100/100-18
Trail113mm (4.4 inches)
Wheelbase58.3 inches
Seat Height37.7 inches
Fuel Capacity1.9 gallons
Final Drive520 chain; 13T/51T
Rake27.5 degrees
Rear SuspensionPro-Link Showa single shock with spring preload, 17-position rebound damping adjustability, and 13-position compression damping adjustability; 12.4 inches travel
Curb Weight254 lbs (Includes all standard equipment, required fluids and a full tank of fuel—ready to ride)

Related product manuals