38 Servicing Your Honda
Subframe Upright Position
Refer to Safety Precautions on page 25.
The subframe may be adjusted to an upright
position to permit servicing of the rear
suspension.
Upright Position
1. Remove the right side cover bolt (1), collar
(3), seat mounting bolt (2) and right side
cover (4).
4. Remove the muffler (page 62).
5. Remove the wire band (12).
(12) wire band
6. Loosen the screw (13) on the air cleaner
connecting tube clamp (14).
(13) screw
(14) air cleaner connecting tube clamp
7. Loosen the subframe mounting upper bolt
(15) and remove the subframe mounting lower
bolts (16).
(15) subframe mounting upper bolt
(16) subframe mounting lower bolts
8. Lift the subframe (17) as shown.
Tighten the subframe mounting upper bolt to
the specified torque:
30 N·m (3.1 kgf·m, 22 lbf·ft)
(1) right side cover bolt (3) collar
(2) seat mounting bolt (4) right side cover
2. Open the air cleaner housing cover (5) by
turning the quick fastener (6)
counterclockwise and remove the left side
cover bolt (7), collar (9), seat mounting bolt
(8) and left side cover (10).
3. Remove the seat (11) (page 35).
To Next Page
Loading...
Need help?
General
