−−
−−
32
SPARK PLUG SERVICE
Recommended spark plugs:
The gap should be:
PLUG WRENCH
0.028 0.031 in (0.7 0.8 mm)
SEALING WASHER
To ensure proper engine operation, the spark plug must be properly
gapped and free of deposits.
If the engine has been running, the muffler will be very hot. Be careful
not to touch the muffler.
Use a spark plug wrench to remove the spark plug.
Remove the spark plug cap.
Clean any dirt from around the spark plug base.
W16EPR-U (DENSO)
BPR5ES (NGK)
Inspect the spark plug. Replace it if the electrodes are worn or if the
insulator is cracked, chipped, or fouled.
Measure the plug gap with a wire-type feeler gauge.
Correct as necessary by carefully bending the side electrode.
0.028 0.031 in (0.7 0.8 mm)
1.
2.
3.
4.
5.
09/03/03 15:48:34 31ZC2770_033
To Next Page
Loading...
Need help?
General
