(1)
RIGHT HANDLEBAR
(2)
(1) start button
(2) engine stop switch
20
Start Button Engine Stop Switch
Controls & Features
Instruments & Controls
Starting Procedure,
The start button ( ) is used for starting the
engine. Pushing the button in starts the
engine. See page .
The engine stop switch ( ) is used to stop
the engine in an emergency. To operate,
push the switch to the OFF position. The
switch must be in the RUN position to
start the engine, and it should normally
remain in the RUN position even when the
engine is OFF.
When the start button is pushed, the starter
motor will crank the engine.
The electric starter will only work when
the rear brake lever is pulled in.
1
2
42
05/06/03 13:28:05 31GV4770_029
To Next Page
Loading...
Need help?
General