14
BEFORE OPERATION
Check the Engine
Check the Equipment Powered by This Engine
Check the engine oil level (see page ). Running the engine with a
low oil level can cause engine damage.
The Oil Alert
system (applicable engine types) will automatically
stop the engine before the oil level falls below safe limits. However,
to avoid the inconvenience of an unexpected shutdown, always
check the engine oil level before startup.
Check the transmission oil level on applicable engine types (see
page ). Oil is essential to transmission operation and long life.
Check the air filter (see page ). A dirty air filter will restrict air flow
to the carburetor, reducing engine performance.
Check the fuel level. Starting with a full tank will help to eliminate or
reduce operating interruptions for refueling.
Review the instructions provided with the equipment powered by this
engine for any precautions and procedures that should be followed
before engine startup.
29
31
26
03/08/21 20:08:20 31ZH9613_015
To Next Page
Loading...
Need help?
General
