OPERATION
AFTER MOWING
Under most conditions, the lawn tractor accumulates clippings, mud,
dirt and other debris on the mower deck and other areas. Frequently,
such debris contains moisture, which if allowed to remain on the
mower frame, mower deck or other metal parts, can form rust.
Regular cleaning not only helps prevent such rusting, but also makes
the lawn tractor operate better. Also, it is much easier to clean these
parts when the debris or clippings are fresh rather than stuck on the
lawn tractor for days or weeks at a time.
Mower Deck Cleaning
Wash the mower deck only when the lawn tractor is cool. The
bearings on the blade pulley shafts expand as they heat up. Cooling
rapidly with water can allow moisture to’be trapped inside the
bearings. This can cause rust to form on the bearing surfaces and
shorten bearing life.
Cleaning Other Areas
Certain parts other than the mower deck can accumulate clippings
and other debris. When the lawn tractor is cool, you should inspect
these areas and brush or wipe off any debris with a soft brush or
damp rag. Look around the top of the engine, exhaust area and
muffler and by the rear axle near the frame. Do not spray water
directly on the engine.
46
To Next Page
Loading...
Need help?
General
