When the system activates:
Emergency Stop Signal
Emergency stop signal activates when the
system detects hard braking about 50 km/h
(30 mph) or above to alert drivers behind
you about sudden braking by rapidly flashing
both turn signal lights. This may help to alert
drivers behind you to take appropriate
means to avoid a possible collision with your
vehicle.
The emergency stop signal stops operating
when:
● You release the brakes.
● The ABS is deactivated.
● Your vehicle's decelerating speed
becomes moderate.
● You press the hazard switch.
20201006171709_32K1BF000_eng_BOOK Page 69 Tuesday, October 06 2020 17:20:39 JST
Operation Guide
66
Hard braking
Brakelight come on
Both turn signals flash
Both turn signal indicators blink