50
Maintenance Fundamentals
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tyre, can be a major inconvenience.
Check the following items before you get on
your vehicle:
● Fuel level-Fill fuel tank when necessary.
2 P. 37
● Throttle-Check for smooth opening and full
closing in all steering positions.
2 P. 80
● Engine oil level-Add engine oil if necessary.
Check for leaks. 2 P. 69
● Brakes-Check operation;
● Lights and horn-Check that lights, indicators
and horn function properly.
● Side stand ignition cut-off system-Check for
proper function. 2 P. 79
● Wheels and tyres-Check condition, air
pressure and adjust if necessary.
2 P. 56
Pre-ride Inspection
Front: check brake fluid level and pads
wear. 2 P. 73, 74
Rear: check shoes wear and freeplay,
adjust if necessary.
2 P. 75, 78
20 ACF110BT CBT (CA)-32K93D10.book Page 50 Tuesday, February 18, 2020 4:43 PM
To Next Page
Loading...
Need help?
General