87
When the Idling Stop System Does Not Operate Properly
Idling Stop Indicator Does Not
Come On
When the Idling Stop indicator does not come
on, perform the followings.
Press the Idling Stop switch to IDLING STOP.
If you started the engine with the kickstarter,
the Idling Stop system may not operate.
Restart the engine with the start button,
referring to the starting procedure (
2 P. 29)
for standard engine staring.
Warm up the engine.
The Idling Stop system does not operate when
the engine is cold.
Ride the vehicle at speeds of over 10 km/h
(6 mph). The Idling Stop system does not
operate until you ride once.
When the PGM-FI malfunction indicator lamp
(MIL) lights, the Idling Stop system does not
operate for protection of the engine. See your
dealer.
Ride the vehicle awhile, then stop the engine
and then restart the engine with start button,
referring to the starting procedure (
2 P. 29)
for standard engine starting. The Idling Stop
system may not operate if the battery voltage
is low.
If this occurs frequently, contact your dealer.
If the Idling Stop switch is at IDLING:
If you started the engine with the kickstarter:
If you did not ride the vehicle after engine
starts:
If PGM-FI malfunction indicator lamp (MIL)
lights:
If the battery voltage is low:
20 ACF110BT CBT (CA)-32K93D10.book Page 87 Tuesday, February 18, 2020 4:43 PM
To Next Page
Loading...
Need help?
General