Removing & Installing Body Components u Battery
61
Battery
❙
Removal
Make sure the ignition switch is off.
1.
Remove the battery cover. 2 P. 58
2.
Unhook the rubber strap.
3.
Disconnect the negative - terminal from
the battery.
4.
Disconnect the positive + terminal from
the battery.
5.
Pull out the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive +
terminal first. Make sure that bolts and nuts
are tight.
For proper handling of the battery, see
“Maintenance Fundamentals.”
2 P. 49
Battery Goes Dead 2 P. 88
Negative
terminal
Rubber strap
Battery
Positive
terminal
To Next Page
Loading...
Need help?
General