85
When the Idling Stop System Does Not Operate Properly
Engine Does Not Stop by the
Idling Stop System
When the Idling Stop system does not
operate properly (the Idling Stop switch is at
IDLING STOP position), perform the
followings.
Push the Idling Stop switch to IDLING STOP
and check the Idling Stop indicator comes
on.
Warm up the engine.
Stop the scooter completely. The Idling Stop
system operates if the speed is only at 0 km/h
(0 mph).
Close the throttle completely.
Ride the scooter at speeds of over 10 km/h
(6 mph). The Idling Stop system does not
operate until you ride once.
When the PGM-FI malfunction indicator
lamp (MIL) lights, the Idling Stop system does
not operate for protection of the engine. See
your dealer.
If the Idling Stop switch is at IDLING:
If the scooter does not stop completely:
If the throttle is not closed completely:
If you did not ride the scooter after engine
starts:
If PGM-FI malfunction indicator lamp (MIL)
lights:
To Next Page
Loading...
Need help?
General