10
Check All Bolts and Nuts
1. Check each bolt and nut for looseness. Tighten them securely if
necessary.
2. Check the handle for loose mounting bolts, and tighten them
securely if necessary.
THROTTLE ASSEMBLY
HANDLE MOUNTING BOLTS (4)
LOOP HANDLE
OPERATION
SAFE OPERATING PRECAUTIONS
Before operating the powerhead for the first time, please review the
SAFETY INFORMATION (see pages 2–3) and the BEFORE OPERATION
CHECKS (see pages 7–10).
For your safety, do not operate the powerhead in an enclosed area such
as a garage. Your powerhead’s exhaust contains poisonous carbon
monoxide gas that can collect rapidly in an enclosed area and cause
illness or death.
Read and understand the safety instructions on pages 7 to 10 before
operating the powerhead.
If you notice any abnormal sound, smell, vibration, or other unusual
signs, stop the engine immediately and consult your authorized Honda
dealer.
With the engine idling, hook the powerhead to your carrying harness and
hold the powerhead at the correct position.
Hold the powerhead firmly with both hands, with your fingers and
thumbs encircling the handles as shown. This will help you to keep the
powerhead under control at all times.
For how to use the attachment, read and follow the instructions in the
owner’s manual that came with each attachment.
In an emergency, pull up on the quick-release latch tab to detach the
powerhead from the carrying harness.
Exhaust contains poisonous carbon monoxide gas that can
build up to dangerous levels in closed areas.
Breathing carbon monoxide can cause unconsciousness or
death.
Never run this product's engine in a closed, or even partly
closed area.
31VP86080.fm 10 ページ ２０２３年１０月５日 木曜日 午後２時２２分
To Next Page
Loading...
Need help?
General
