11
STARTING THE ENGINE
Start the engine in a place away from the people, pets, and surrounding
buildings. Be sure there are no obstacles in the working area.
1. Move the engine switch to the ON position.
2. To start a cold engine, move the choke lever to the CLOSED position.
To restart warm engine, leave the choke lever in the OPEN position.
Do not use the choke if the engine is warm or the air temperature is
high.
Exhaust contains poisonous carbon monoxide gas that can
build up to dangerous levels in closed areas.
Breathing carbon monoxide can cause unconsciousness or
death.
Never run this product's engine in a closed, or even partly
closed area.
CHOKE LEVER
CLOSED
OPEN
CLOSED
OPEN
3. To start a cold engine, press the priming pump several times until the
priming pump is filled with fuel.
Even if the priming pump is pressed too many times, the extra fuel
will return to the fuel tank.
If the priming pump is not pressed enough, the engine may not start.
4. Pull the starter grip lightly until you feel resistance while holding the
main pipe, then pull briskly in the direction of the arrow as shown
below. Return the starter grip gently.
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter.
Damage may result if the starter grip is pulled while the engine is
running.
5. If the choke lever has been moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine warms
up.
PRIMING PUMP FUEL RETURN TUBE
STARTER GRIP
MAIN PIPE
Direction
to pull
31VP86080.fm 11 ページ ２０２３年１０月５日 木曜日 午後２時２２分
To Next Page
Loading...
Need help?
General
