BEFORE OPERATION
ARE YOUR SHOULDER HARNESS AND TRIMMER CORRECTLY ADJUSTED?
Adjusting the Harness Balancing the Trimmer on the Shoulder
Adjust the harness
so
the quick-release latch is
at your right hip, as shown. Hang the trimmer on the harness hook, and see
Harness
how it balances.
Adjust the shoulder harness, the hanger clamp on
the trimmer shaft, and the loop handle or U-type
handlebar,
so
the handle or handlebars are in a
comfortable operating position, and the trimmer
hangs with its cutting attachment a few inches
above the ground (see page
19).
QUICK.
LATCH
FULL SHOULDER HARNESS
.E
A
few inches above
the ground
SINGLE-STRAP SHOULDER HARNESS
16
To Next Page
Loading...
Need help?
General
