RECOMMENDED CUTTING ATTACHMENTS
CUTTING-LINE HEADS AND SHIELD
CUTTING-LINE HEAD
A cutting-line head containing nylon monofilament
\
NYLON MONOFILAMENT LINE
I
line, and a debris shield with cutoff knife is
standard equipment. The shield’s cutoff knife
automatically removes any excess line that is
released from the cutting head.
Honda UMK431 UNBA trimmers are supplied with
two different debris shields. Use the debris shield
with the cutoff knife when the cutting-line head is
installed.
Nylon monofilament line is suitable for cutting
DEBRIS SHIELD
grass and ordinary weeds, but not brush and
woody growth.
MANUAL-FEED CUTTING-LINE HEAD
Manual-Feed Cutting-Line Head
Line is released from the cutting head by
manually pulling and turning the
spool
with the
trimmer stopped.
Semiautomatic (bump-feed) Cutting-Line Head
Line is released from the cutting head by bumping
the spool on hard ground during operation.
SEMIAUTOMATIC
(bump-feed)
CUTTING-LINE HEAD
7
To Next Page
Loading...
Need help?
General
