OPERATION
STOPPING THE ENGINE
1.
Release the throttle lever.
2.
Move the ignition switch button to the
OFF
(0)
position.
Wait for the cutting line head or blade to stop
before allowing the end of the trimmer to
contact anything.
The blade will continue to spin briefly after
the engine has stopped or the throttle
trigger is released.
IGNITION
.SWITCH
BUlTON
OFF
(0)
LATCH TAB
A
coasting blade can cause injury.
Maintain proper control of the trimmer until
the blade has completely stopped rotating.
TRIMMER/HARNESS QUICK DISCONNECTION
To
quickly detach the trimmer from the harness,
pull the quick-release latch tab upward.
Insert the latch tongue in the slot of the quick-
release latch to reattach the trimmer to the
harness.
TRIMMER OPERATION
Operating Position
Hold the trimmer firmly with both hands, with your
fingers and thumbs encircling the handles as
shown. This will help you to keep the trimmer
under control at all times.
Keep firm footing and balance.
Do
not overreach.
Keep the cutting attachment below waist level.
Keep all parts of your body away from the
rotating cutting attachment and hot surfaces.
19
To Next Page
Loading...
Need help?
General
