Clutch
Checking the Clutch System
1.
Loosen the lock nut.
2.
Turn the clutch adjuster clockwise one
turn; do not turn excessively.
3.
Slowly turn the adjuster counterclockwise
until a slight resistance is felt.
From this position, turn the adjuster
clockwise 1/8 turn, and tighten the lock
nut.
4.
After adjustment, test ride the motorcycle
to be certain the clutch operates properly.
The engine should start easily with the
kicickstarter without the clutch slipping.
When shifting gears, the clutch operation
should be smooth and light, especially when
shifting into neutral.
To Next Page
Loading...
Need help?
General