Torque Control Indicator
WW125A
If the indicator operates in one of the
following ways, you may have a serious
problem with the Torque Control. Reduce
your speed and have your vehicle inspected
by your dealer as soon as possible.
●
Indicator comes and stays on (solid) while
riding.
● Indicator does not come on when the
ignition switch is turned to the (On)
position.
●
Indicator does not go off at speeds above
3 km/h (2 mph).
Even when the Torque Control indicator is
on, your vehicle will have normal riding ability
without Torque Control function.
u When the indicator comes on while the
Torque Control is in operation, you will
have to completely close the throttle to
regain normal riding ability.
The Torque Control indicator may come on if
you rotate the rear wheel while your vehicle
is lifted off the ground. In this case, turn the
ignition switch to the
(Off) position, and
then to the (On) position again. The Torque
Control indicator will go off after your speed
reaches 3 km/h (2 mph).
Warning Indicators On or Flashing u Torque Control Indicator
Troubleshooting
129
To Next Page
Loading...
Need help?
General