Honeywell BW Flex Series User Manual

Activate the Detector
To turn the detector on, press, and hold the button for four seconds. LEDs light and the
instrument vibrates and beeps.
The detector performs a Self Test, the IntelliFlash flashes amber, and Sensors warm-up.
During the Sensor warm-up, the sensors LEDs flash clockwise.
In the regular mode, the IntelliFlash flashes green every fifteen seconds.
Self Test
When the detector is activated, it performs several start-up tests:
Firmware Version
BLE Version
End Of Life sensors, if any.
Bump Due Date by sensor
Calibration Due Date by sensor
Low Alarm Setpoint by sensor
High Alarm Setpoint by sensor
STEL Alarm Setpoint by sensor
BW Flex Series 11 User Manual

Honeywell BW Flex Series Specifications

General

Brand	Honeywell
Model	BW Flex Series
Category	Gas Detectors
Language	English