Honeywell Class 320 Meter User Manual

CLASS 320 METER
62-0397-02 38
Fig. 27. Push Buttons.
10.3 How to Program the Display Screens
The display information can be programed using four push buttons switches. The push
buttons (DOWN, UP, SELECT, MENU) are located at the bottom of the display board
on the inside front door of the meter. The buttons are used to program the following:
• Date & Time (This field sets the month, day, year, and time.)
• Device ID (This field changes the default setting, which is 1A for EZ7 and 1 for
ModBus.)
• Reset KW/KWH Read (This field resets the Peak kW Demand to zero.)
M33279
DOWN
UP
SELECT
MENU

Honeywell Class 320 Meter Specifications

General

Brand	Honeywell
Model	Class 320 Meter
Category	Measuring Instruments
Language	English