12
To quickly move through the log enter a three digit number between 001 and 250 followed by
the # key. The system will jump to the event number entered.
To exit from the Log option press the esc key.
Option 10 – Time
The Time option allows the system manager (User 14) to modify the four time features of the
system, these are:
• Time (hr:min)
• Date (dd/mm/yy)
• Start Summer (dd/mm) – the date that summer time begins (clocks go forwards).
• End Summer (dd/mm) – the date that summer time ends (clocks go backwards).
Selecting the Time Option
Enter your User Code and press the ent key. Press the B key until the Time option is displayed
then press the ent key.
Operation of the Time Option
On selecting the Time option 1=TIME is displayed. If the time requires to be modified press the
ent key and enter the time (this is a four digit number and must be a valid time between 00:00
and 23:59). Press the ent key to accept the programming and esc to cancel.
To change one of the other time features use the A or B keys to select the required option and
follow the same procedure as for modifying the Time option.
To exit from the Time option press the esc key.
To Next Page
Loading...
Need help?
General
