Drain the water through the faucets and draining plug.
MAINTENANCE
TECHNICAL SPECIFICATION
MODEL NO. VOLTAGE &
FREQUENCY
RATED TOTAL
POWER
HEATING
POWER
COOLING
POWER
HEATING
CAPACITY
COOLING
CAPACITY
HWTLMT508W 230V~, 50Hz 485W 420W
65W
CAUTION:
Cleaning the outside of the water dispenser
Never use corrosive elements or any chemicals to clean this product.
When the product is not in use, store the unit in a dry place away from direct
sunlight.
Before cleaning the unit, switch the hot and cold switches to the OFF position
and remove the plug from the power socket.
To clean the outside of the unit, use a soft cloth with warm water. Avoid
abrasive cleaners or hard materials to prevent damage and/or scratches to
the unit.
Clean the dip tray regularly to avoid water buildup. To remove the drip tray
simply lift it up and outward.
To clean the back of the machine, clean with a duster such as a microfiber
cloth and/or vacuum the coils using the duster attachment of the vacuum
cleaner (please refer to your vacuum cleaner owner’s manual).
Turn OFF the hot and cold water switches, and unplug the power cord from
the power supply.
Storing your Water Dispenser
Please follow these instructions to store the water dispenser when it will not
be used for an extended period of time.
The unit must be stored in an upright position and protected from dust.
EN 9
5L/h -≥ 90
0
C 1L/h -≤ 15
0
C
To Next Page
Loading...
Need help?
General
