Chapter 4 — Printer Configuration
36 MP Nova Mark II User Guide
Windows Driver
The Windows driver is located on the Accessories CD included with your printer.
For the latest version please visit our website at www.honeywellaidc.com.
1 Place the Accessories CD included with your pinter into your computer’s CD
drive.
2 Once the CD starts, select your printer model and click Install Driver from the
menu. Follow the instructions on the screen to install.
3 When prompted, select your printer from the list. Continue to follow the on-
screen instructions to install the driver.
Note: Be sure your printer’s firmware version is 15.04_0001 or greater.
Firmware is available from our website. For the latest version please visit our
website at www.honeywellaidc.com.
Note: Be sure your printer’s USB Mode is set to “Printer.” This mode can be
viewed/changed via the printer’s front panel menu under: Communications >
USB Port > USB Device Class.
To Next Page
Loading...
Need help?
General