Honeywell MP Nova Mark II User Manual

Chapter 6 — Printer Maintenance
54 MP Nova Mark II User Guide
Changeable Parts
Roller Replacement
s
1 Check that the printer is turned off and open the cover (see“Open and
Close the Printer Cover” on page 11).
2 Pull the roller and the roller bearing support to the right (use the rubber
surface when pulling right).
3 Lift the left-hand end of the roller toward the interior of the printer.
4 Lift out the right-hand end of the roller.
Note: The pictures shown describe an MP Nova4 DT. The process is the same
for all MP Nova Mark II printers.

Honeywell MP Nova Mark II Specifications

General

Brand	Honeywell
Model	MP Nova Mark II
Category	Printer
Language	English