118 PX4i and PX6i High Performance Printer User Guide
Media Type
Set media type to one of these values:
• Fingerprint:
• FIX LENGTH STRIP
• VAR LENGTH STRIP
• IPL: CONTINUOUS
Self-Adhesive Strip
Self-Adhesive Labels
External Media Width Including Liner (a)
Liner (b)
The backing paper must not extend more than a total of 1.6 mm (0.06 in) outside
the labels and should protrude equally on both side. Recommended minimum
transparency: 40% (DIN 53147).
Printer Measurement Value
PX4i Maximum 120 mm (4.72 in)
Minimum 25.0 mm (1.00 in)
PX6i Maximum 170 mm (6.69 in)
Minimum 76.0 mm (3.00 in)
To Next Page
Loading...
Need help?
General
