12 34-ST-25-19 RMA 3000 Remote Meter Assemblies User Manual Release 1
6/04
Wiring Drawings - Overview
The wiring drawings included in the following tables are included in this manual to provide a quick
reference for interpreting the information given in the Honeywell-certified engineering drawings referenced
in the tables. These simplified drawings are intended for use along with certified engineering drawings to
indicate the similarities / differences among various wiring configurations.
WARNING
These simplified drawings are not intended as a substitute for the certified drawings. The certified
drawings must be used as the sole source for wiring installation instructions.
A legend for use with the wiring diagrams overview is given in Figure 8. In this illustration, the power
source shown at left in a dashed outline represents all of the following components shown in the certified
drawings:
• Power Supply
• Control Equipment
• Approved Associated Apparatus
Figure 8 Legend for Wiring Diagrams Overview
To Next Page
Loading...
Need help?
General
