8 SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000SK-E:G 4/13/2020
Section 1: Overview
1.1 Purpose
The SWIFT® Network Manual provides an overview of the following:
• Wireless fire alarm system
• Instructions for installing and configuring the wireless devices
• Information on monitoring the status of the wireless devices
• Removal and replacement procedures of the Wireless Gateway
• Testing, maintenance, and firmware upgrade information of the Wireless Gateway
1.2 Assumed Knowledge
This document is created with the assumption that all users are familiar with working on a PC and laptop for configuration purposes.
Installers should be familiar with the fire alarm and related service standards. The terminology and level of details of this document
reflect this assumption.
1.3 Additional References
The table below provides a list of documents referenced in this manual, as well as documents for selected other compatible devices.
1.4 About this Manual
This manual correlates with SWIFT Tools version 4.0 (and higher) and the programming features included in that release. Devices not
running the current version of the software will not have the same capabilities. Ensure the latest version of SWIFT Tools is installed for
proper functionality.
Systems running version 4.0 (and higher) will:
• require device tamper to remove a profile (return to factory default) with a 60 minute timeout.
• have option to enable/disable max gateway trouble reporting.
• require device tamper to upgrade the firmware on individual devices.
Systems running 4.0 (and higher) will not be able to:
• create profiles in the gateway without using SWIFT Tools.
• distribute profiles from the gateway to devices.
• use devices as profile distributors.
6820/6820EVS Fire Alarm Control Panel LS10144-001SK-E
6808 Fire Alarm Control Panel LS10146-001SK-E
6700 Fire Alarm Control Panel LS10146-001SK-E
WSK-PHOTO Wireless Photo Detector with 4” Base I56-4269
WSK-PHOTO-T Wireless Photo/Heat Detector with 4” Base I56-4269
WSK-HEAT-ROR Wireless Rate Of Rise Heat Detector with 4” Base I56-4270
WSK-HEAT Wireless Fixed Heat Detector with 4” Base I56-4270
WSK-MONITOR Wireless Monitor Module I56-4271
WSK-RELAY Wireless Relay Module I56-4272
WSK-PULL-DA Wireless Pullstation I56-6563
WAV-RL Red Wall AV Base I56-6517
WAV-WL White Wall AV Base I56-6517
WAV-CRL Red Ceiling AV Base I56-6517
WAV-CWL White Ceiling AV Base I56-6517
SWIFT Wireless AV Bases I56-6517
W-SYNC Wireless Sync Module I56-6518
MDL3 Sync Module I56-3157
HPFF8 NAC Expander 53499
HPFF12 NAC Expander 53576
To Next Page
Loading...
Need help?
General
