EasyManuals Logo
Home>Honeywell>Transmitter>STDW810

Honeywell STDW810 User Manual

Honeywell STDW810
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
4. Product Specification
4.1. ISA100 Radio, 2.4 GHz
8 SmartLine Wireless Transmitter Professional Installation Guide Revision 1
4. Product Specification
4.1 ISA100 Radio, 2.4 GHz
WARNING!
The SmartLine Wireless Transmitter must be Professionally Installed in
accordance with the requirements specified in this document. See Section 7
for professional installation maximum TX power setting requirements.
Only the specified TX power settings, antenna types and gains and cable lengths
(attenuation) as outlined in this document are valid for SmartLine Wireless
Transmitter installations.
Table 4-1 Specifications of ISA100 Radio Module in SmartLine Wireless
Transmitter
Item
Specification
Wireless
Standard
FCC 15.247 / IEEE 802.15.4 Direct Sequence Spread Spectrum
(DSSS), 2.4 GHz
Data Rates and
Modulation
Data Rate: 250 kbps
Modulation: Offset Quadrature Phase-Shift Keying (OQPSK DSSS)
Frequency Band
2,405 2,475 MHz
Module Transmit
Power
Maximum: 20 dBm
(Maximum transmit power will vary by channel)
Receive
Sensitivity
(typical)
-100 dBm

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell STDW810 and is the answer not in the manual?

Honeywell STDW810 Specifications

General IconGeneral
BrandHoneywell
ModelSTDW810
CategoryTransmitter
LanguageEnglish

Related product manuals