Honeywell TUXWIFIS Installation And Setup Guide

19
Setup Menus
Brightness and Volume Control
Press the Setup icon. Move the Brightness/Volume slide bar up or down to increase or decrease
settings. Yes saves the change. No discards the change. If changes are made, when you exit a pop-up
window displays: “Information Settings Saved“
Display & Audio Setup
Operating Modes provides access to: Chime Mode, Voice Mode, and Voice Chime.
- When in Chime Mode Tuxedo chimes whenever a door or window is open.
- When in Voice Mode the Tuxedo voice annunciates whenever a change in system status occurs such as
Armed, Disarmed, or Alarms.
- When in Voice Chime the chime mode and voice mode are in effect. The chime beeps followed by voice
annunciation.
Press the Setup and Disp & Audio Setup icons; enter an authorized code, if required. Select
Chime Mode or Voice Mode to turn the mode on or off.
Press the HOME or BACK icon after making your selection.
IMPORTANT: The Chime feature is intended for convenience and is not intended for life safety purposes or
pool alarm and does not meet the requirements of UL 2017.
NOTES:
• If the Chime Mode and Voice Mode are both selected, the Voice Chime is automatically selected.
• When Tuxedo exits the “Operating Modes” screen, your selection is saved.
• It may take a few seconds for the Chime Mode to take effect.
Language Selection (if applicable)
Tuxedo has the functionality to display four languages including multi-lingual web page display. Set the
language feature as follows:
Press the Setup and Disp & Audio Setup icons and then enter your Authorized Code, if
required.
Press the Language field, and select from English, French Canadian, Latin American Spanish, or Latin
American Portuguese; English is the default.
NOTE: After the language is selected, a pop-up window displays: “Settings saved language has been
changed, you should reset the system.” Select OK or Cancel. Tuxedo reverts back to the
“Home” screen with the selected language applied.
Weather Forecast
The *Weather forecast is displayed on the “Home” screen. To set the weather forecast for a specific
location, press the “Weather” feature. Select USA / Canada / Other. Select Zip Code / Postal Code and
enter the required information or press Country/City and select from the drop-down list. Weather
conditions for that location are displayed. To select the temperature unit, see “Temperature Unit” below.
* The Weather option must be enabled to operate. Press Setup > System setup > CS Setup > Options.
Select the Weather Forecast option to turn this feature on or off; press Apply.
Temperature Unit
The temperature units for the weather display on Tuxedo’s home screen can be switched between
Fahrenheit and Celsius. Press the Setup and Disp & Audio Setup icons; enter an authorized
code. Select the temperature scale, Celsius or Fahrenheit.

Honeywell TUXWIFIS Specifications

General

Brand	Honeywell
Model	TUXWIFIS
Category	Security System
Language	English