Honeywell VisionPRO 8000 Smart User Manual

33-00066EFS—05 1
Quick reference: residential use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here
to set a program schedule.
Current status. Shows system mode
(heat/cool) and outdoor temperature (with
optional outdoor sensor).
Current schedule. Touch an arrow to
change temperature setting and select a
Temporary or Permanent Hold.
Indoor conditions. Shows indoor
temperature and humidity.
Current time. Touch to set the current time/
date.
Alert Light. On when alert message is
active or system is set to EmHeat.
The screen lights when you press any button. It stays lit for 45 seconds after you
complete changes. Depending on how your thermostat was installed, the screen
light may always be on.
Quick reference: commercial use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here
to set a program schedule.
Current status. Shows system mode
(heat/cool) and outdoor temperature (with
optional outdoor sensor).
Override. Touch to override program
schedule.
Current schedule. Touch an arrow to
change temperature setting and set a
temporary hold.
Current program status.
Indoor conditions. Shows indoor
temperature and humidity.
Current time. Touch to set the current time/
date.
Alert Light. On when alert message is
active or system is set to EmHeat.

Honeywell VisionPRO 8000 Smart Specifications

General

Brand	Honeywell
Model	VisionPRO 8000 Smart
Category	Thermostat
Language	English