Honeywell VISTA 15P - Ademco 6 Zone Control Panel User Manual

– 24 –
Chime Mode
Using the Chime Mode
CHIME mode alerts you to the opening of a perimeter door or window while the
system is disarmed.
When Chime mode is activated:
• Three tones sound at the keypad whenever a perimeter door or window is opened.
• Interior zones do not produce a tone when they are faulted.
• Pressing the READY key will display the open protection points.
• Chime mode can be used only while the system is disarmed.
To turn Chime Mode on:
+ 9 CHIME
(Security Code)
The CHIME message will appear. Perimeter zones
will cause a tone when faulted.
Alpha Display:
DISARMED CHIME
READY TO ARM
Fixed-Word Display: CHIME
To turn Chime Mode off:
+ 9 CHIME
(Security Code)
The CHIME message will disappear.
Alpha Display:
∗∗∗∗DISARMED∗∗∗∗
READY TO ARM
Fixed-Word Display: READY
Using the Voice Chime
Voice keypads have a feature that works in concert with the Chime Mode called Voice
Chime. Voice chime provides a voice status annunciation, chime, and display when
any faulted entry/exit or perimeter zone exists. Ask your installer if this option has
been enabled for your system.
To turn Voice Chime Mode on or off:
# + 0 + 2 + 4
(normal Chime mode must be on first)
When Voice Chime is on, faulted zones cause a voice status announcement, chime and display.
When off, the sounder still provides chime if normal Chime mode is on.
National Security Systems Inc (800) 457-1999

Honeywell VISTA 15P - Ademco 6 Zone Control Panel Specifications

General

Brand	Honeywell
Model	VISTA 15P - Ademco 6 Zone Control Panel
Category	Security System
Language	English