Honeywell Voyager XP 1472g2D User Manual

Add Code ID Prefix to all Symbologies
Scan the following bar code if you wish to add a Code ID prefix to
all symbologies at once.
Note: For a complete list of Code IDs, see the User’s Guide for
your product.
Function Code Transmit
When this selection is enabled and function codes are con-
tained within the scanned data, the scanner transmits the func-
tion code to the terminal. Charts of these function codes are
provided in your User’s Guide. When the scanner is in keyboard
wedge mode, the scan code is converted to a key code before it
is transmitted.
Data Format Editor Instructions
The following are abbreviated instructions for entering a data
format. For complete instructions refer to your User’s Guide.
Add Code ID Prefix To All Symbologies
(Temporary)
Enable
(Default)
Disable

Honeywell Voyager XP 1472g2D Specifications

General

Connectivity	Bluetooth
Environmental Sealing	IP42
Operating Temperature	0°C to 50°C (32°F to 122°F)
Weight	210 g (7.4 oz)
Motion Tolerance	Up to 400 cm/s (157 in/s) for 13 mil UPC at optimal focus
Expected Duration of Operation	14 hours
Expected Charge Time	4.5 hours
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	0% to 95% relative humidity, non-condensing
Light Levels	0 to 100, 000 lux
Battery	Lithium-ion battery
Drop Specification	Designed to withstand 30 drops from 1.8 m (6 ft) to concrete
Decode Capabilities	Reads standard 1D, PDF, 2D
Number of Scans	Up to 50, 000 scans per charge
Scan Angle	Horizontal: 40°; Vertical: 30°