XNX Universal Transmitter Quick Start Guide
44
Status Indicator
Current Concentration Level
(Numeric)
Alarm 2 Set Point
rrent Concentration Level
(Bar Graph)
Full Scale
Concentration Units
Figure 31. General Status screen - normal operating mode
The Normal Operating Mode icon gives visual indication of proper operation.
When a warning is triggered, the Warning icon appears and information is
displayed on the General Status Screen.
Figure 32. General Status Warning - detail
If the fault icon is displayed, a fault condition has been triggered and the
display will alternate the display of the target gas concentration and the fault
code.
Figure 33. General Status Fault - detail
When an alarm icon is displayed, the target gas concentration exceeds
one or both preset alarm levels. The General Status Screen displays the gas
concentration and alarm level exceeded.
Target Gas
Co
ncentration
Alarm Icon
Alarm Level Triggered
Figure 34. General Status Alarm - detail
In an overrange condition, the alarm icon will display but the target gas
concentration bar graph and alarm setpoints will flash, see illustration below.
Full Scale
Concentration
Alarm Level Triggered
Concentration Bar, Alarm Setpoints Flash
Figure 35. General Status Overrange - detail
In addition to the graphic Alarm, Fault and Warning
Figure 38. Zero Calibration
Passed
To Next Page
Loading...
Need help?
General
