Another way to exit remote control mode
! Press the “START/RESET” button for 3
seconds: any running cycle will be
cancelled, and the appliance will exit
REMOTE CONTROL mode. It is now
possible to set a new wash cycle from the
control panel.
This indicator light indicates the connection
status:
- ON: remote control enabled.
- FLASHING SLOWLY: remote control disabled.
- FLASHING RAPIDLY FOR 3 SECONDS,
THEN OFF: the appliance is unable to
connect to the home Wi-Fi network or has
not yet been paired with the app.
- 3 SLOW FLASHES, THEN OFF FOR 2
SECONDS: the Wi-Fi network is being
reset (while pairing with the app).
- ON FOR 1 SECOND, THEN OFF FOR 3
SECONDS: the door is open, remote
control cannot be enabled.
To Next Page
Loading...
Need help?
General
