If the fault persists, contact the Technical Assistance Centre.
Plug not connected to wall socket
2. Dishwasher
does not fill
with water
The water supply hose is bent
Eliminate the bends in the hose
The filter of the water supply
hose is clogged
Clean the filter at the end of the
hose
3. Dishwasher
does not
discharge
water
Eliminate the bends in the pipe
The drain pipe extension is not
correctly connected
Follow the instructions for connecting
the drain pipe carefully
The outlet connection on the
wall is pointing downwards not
upwards
Call a qualified technician
4. Dishwasher
discharges
water
continuously
Position of the drain pipe is too
low
Lift drain pipe to at least 40 cm
above floor level
5. Spray arms
are not heard
to rotate
Excessive amount of detergent
Reduce amount of detergent Use
suitable detergent
Item prevents arms from rotating
Filtering plate and filter very dirty
Clean filtering plate and filter
This dishwasher is equipped with an overflow safety device that, in the event of a
problem, automatically discharges any excess water.
WARNING:
To ensure the correct operation of the overflow safety
device, we recommend not moving or tilting the dishwasher
during operation. Should it be necessary to tilt or move the
dishwasher, please ensure that the washing cycle is
complete and that no water remains inside the appliance.
To Next Page
Loading...
Need help?
General
