8. Cover the central hole in the rear of the
machine with the cap enclosed in the
instruction bag.
Choose a location
● After the machine has been installed, ensure
that the mains plug and water supply valves
are easily accessible.
● Make sure there is enough space for the
machine. Select a space at least 600mm wide
and 850mm high. Also leave enough space
to open the door fully so you can load and
unload it easily.
● Keep the area underneath and around the
machine free of combustible materials such
as lint, paper, rags, chemicals etc.
7
Installation
Do not plug the
machine in and
switch it on at
the mains until
the installation
is completed.
To Next Page
Loading...
Need help?
General