Hoover SH40060 User Manual

1. CLEANER ASSEMBLY
5
A. Canister
B. Dirt Cup (packaged attached
to canister)
C. Hose
D. Telescoping Extension Wand
E. Power Nozzle
F. Crevice Tool
G. Dusting Brush
Remove all parts from carton and
identify each item shown.
Make sure all parts are located
before disposing of packing
materials.
1.2 Push Hose Connector end (A) into opening
(B) on front of cleaner. To disconnect hose from
cleaner, press release buttons (C) on sides of Hose
Connector and pull out.
CONNECT HOSE
CARTON CONTENTS
1.2
1.1
A
Actual model may vary from images shown.
B
C
D
E
F
G
IMPORTANT
The flexible hose contains electrical wires for
connection to the Power Nozzle and should not
be used if damaged, cut or punctured.
1.3 Push Hand Grip
(D) firmly into end of
Wand (E) until Latch
clicks. Push button
(F) on wand to utilize
telescopic feature. To
remove Wand from
Hose, press on Wand
Releases Button on
end of Wand and pull
apart.
CONNECT WAND
1.3
1.4 Push the opposite
end of Wand firmly
into Power Nozzle.
To remove, press on
Wand Release Button
(G) and pull wand out to
disconnect from nozzle.
CONNECT NOZZLE
1.4
B
A
C
D
E
F
G
Always turn off appliance before connecting
hose.
WARNING
Always turn off appliance before connecting
Power Nozzle.
WARNING

Hoover SH40060 Specifications

General

Brand	Hoover
Model	SH40060
Category	Vacuum Cleaner
Language	English