HP 1010 User Manual

11
set up your faxset up your faxset up your faxset up your faxset up your faxset up your faxset up your fax
3
set up your fa
x
set the answer modes
Follow these instructions to finish setting up your HP Fax 1010.
set the answer modes
How the product receives faxes depends on the answer mode you chose when you set up
the product. You can send faxes in any answer mode. The answer mode setting determines
how the product answers the incoming call.
 When no document is loaded, press the Ans.Mode/Contrast button until the desired
option displays.
How are you going to use your HP Fax? Read about...
• Fax machine with few or no voice calls.
FAX mode
• Telephone and fax machine without an
answering machine.
AUTO mode
• As a fax machine with an external answering
machine.
TAM mode
• Using Distinctive Ring (DRPD) service to set up a
separate telephone number for your fax on the
same physical line as your other numbers.
See distinctive ring (DRPD) on
page 15.
• FAX mode • In Ready mode, FAX appears in the right hand corner of the display.
• When you get a call, the machine answers after the second ring, and
receives the fax automatically. When reception is complete, the machine
returns to Ready mode.
• If you want to change the number of rings before it answers, see set rings to
answer on page 12.
• AUTO
mode
• In Ready mode, AUTO appears in the right hand corner of the display.
• When a call comes in, the machine answers it. If a fax is being received, the
machine goes into receive mode. If the machine does not sense a fax signal,
it will ring in a different tone to tell you it may be a regular telephone call. If
you do not pick up the handset it will switch back to receive mode after
several more rings.
• If you want to change the number of rings before it answers, see set rings to
answer on page 12.
set up your fax

HP 1010 Specifications

General

Brand	HP
Model	1010
Category	Fax Machine
Language	English